Self-aligning, factory packed with a supply of plastic petroleum assuring proper lubrication during long life of bearing. Self-aligning porous bronze sleeve pressed in housing.
| Humidaire Company, Inc |
Phone: 215-467-4646 Fax: 215-467-1667 |
|
Sleeve Sealed Type Bearings with Insulator Self-aligning, factory packed with a supply of plastic petroleum assuring proper lubrication during long life of bearing. Self-aligning porous bronze sleeve pressed in housing. |
|
|
Oil Type Sleeve Bearings with Insulator Self-aligning, self-oiling, with bronze bushing held in housing wnder light, uniform spring presser, providing uniform distribution of lubricant through pores of bushing. Drive type oil cup. Note:Shipped dry. Lubricate at time of installation with SAE 20 or 30 wt. oil. |
|
Sealed Sleeve Bearings (Replaces Brundage) Self-aligning, factory packed with a supply of plastic petroleum assuring proper lubrication during life of bearing. |
|
|
Flange Type Sleeve Bearing Sorry Obsolete However, it can be replaced with Bearing Bracket Kit #BBK917501 or BBK269901 plus using bearings sp244302 or sp244201 |
|
Oil Sleeve Bearings (Replaces Brundage) Self-oiling with sintered bronze bushing and drive type oil cups. |
|
|
Cartridge Type Sleeve Bearings This cartridge type bearing has been designed to give you fast easy interchangablility. It will fit any spider type" bracket used on 9", 10", and 12" blowers. Sintered bronze bushing pressed into steel bearing caps and cushioned in heavy neoprene conductive rubber. Factory packed with lubricat for many years of quiet, trouble-free service. The Cartridge Bearing with a Joural may permit use of old shaft. |
|
Oil Type - Sleeve Bearings with insulator Self-aligning, self-oiling with sintered bronze bushings and drive type oil cups. NOTE:Re-lubricate with SAE 20 or 30 wt. oil. (DUE to wicking, may need to oil at time of installation.) |
|
|
Thrust Collar Kit Sheet metal thrust collar in 3/4", 5/8", and 1" size. All with hollow head hex set screws. Kit consists of one pair packaged with thrust washers. Note collars from solid steel machined also available. |
